[카테고리:] Mass-Trans Innovation Japan 2021

Itochu TC construction machine Corporation is exhibited Next-generation soundproof sheet “Eko Barrier H9” at Mass-Trans Innovation Japan 2021.

website：https://www.icm.co.jp/

Here, we are treated by us,
It will be the next generation soundproof sheet.

This is the actual actual thing, but
Because the weight is about 5 kg,

You can easily carry alone.
Thus, since it can be carried by winding,

I have a lot of place, and the installation is also very easy.
This is for exhibitions,

Holes are not open, but
Holes are open to the real thing,
In the S-shaped hook, these single tube pipes,

It can be used simply by hanging.
This next generation soundproof sheet is

I hope you have any characteristic,
A low sound is absorbed and a low sound called a sound absorbing material in

Outside, in the blue side of this,

There are two effects of inserting sound.
If you are inserformed, you can sound a high sound,

It is a product that allows low sounds and high sounds, both soundproofing.

This is why here is the next generation soundproof sheet.

Currently, it is actually used in the storage work here,

Working with an impact on screwing,
In fact, this noiseimeter,

We are experimenting that you will see the difference between inside and out.

Izadake Corporation Co., Ltd. is exhibited Bordan “crossing system” at Mass-Trans Innovation Japan 2021.

website：https://www.itake.co.jp/

This is called a Bordan level crossing system,
The best advantage is

At the abdomen of the rail, we have installed rubber,

Install this plate panel on the rubber,
So it is a system that the structure of the level crossing is finished.

It is a bridge structure that is the best advantage,

By placing a panel on the rubber, it is a system for completing construction,

After installation, it will be reversed this time when you want to remove it

It can be easily removed by the hand of the company.

That is the best advantage.
What I will exhibit this time

Even in the branch part, one by one, according to the size of the branch,

Because you can create special panels,
Depending on the order, according to your needs,
You can create a panel.

Izadake Corporation Co., Ltd. is exhibited RAWIE “High Performance Buffy Stop” at Mass-Trans Innovation Japan 2021.

website：https://www.itake.co.jp/

This is a pioneering manufacturer of buffer stops in Germany,
Rawie’s buffer stop, it will stop.

For features of this product,
By colliding with the entering vehicles, this vehicle stops the vehicle stop together,

Deyten energy gradually,

Stop safely,
There is such a character.

This Rawie is
As a safety facility in rail transport,

More than 130 years worldwide,
There is a track record of technology provision.
High quality,

Detailed service to meet your request,
Cost-effective price,

Rigid safety,
Only check by one visual inspection year
By economics that requires almost no maintenance,

It is steadily trusted in Japan,
At the end of this year,

Achievements reach 100 groups.
In order to meet the customer’s trust in the future,

It offers safe and secure products.

Sankwa Industry Co., Ltd. is exhibited Minori silencer at Mass-Trans Innovation Japan 2021.

website：https://www.minori-kogyo.co.jp/

Today is a generator,
You will be used at the noise measures of the engine,

We introduce soundproof product.

It is called Minori silencer,
It is easy to carry into the scene,

Lightweight is selling.

Easy installation,
It can be easily removed after the end of the work,
It is selling one product.

This item is a box for generators, but

Besides, it is a fly work,
There is also a large type of type that can be used for cutting work.

later,
These box types are also

I will bring in this time, but
In combination of panel type,

I am making it.
About panel type,
As we can customize various customizations,
It is a specification that tailored to the site,

It seems to be used for noise measures in the factory
It is a product.

Tokyo Cement Industrial Co., Ltd. is exhibited GRC Lightweight Cable Trough at Mass-Trans Innovation Japan 2021.

website：http://tokyo-cement.com/

I will show you this time,
GRC alkaline glass fiber was included,
It is a cable trough of Tokyo Cement.

It is a normal cable trough,
Rebars are included,
The thickness is also heavy, but

It is made of cement,
It is characterized that it can be laid with light and human power.
The intensity itself is also more than the regular concrete cable trough,

As it is strong,
A lot of adoptions are available.

Since the rebar is not included in again,
Even if you cut in the railway orbit in the field,

The sparks of the rebar are not scattered,
No rust,
That’s why we have adopted a lot.

As a final feature,
As there are incombustibility certification,
For example, underground,

When you use it in the subway,
Even when there is a fire,
Even if it burns, no toxic gas does not occur,

It will be a product that is useful.

Izadake Corporation Co., Ltd. is exhibited Battery Tatmiper ZF-1 type at Mass-Trans Innovation Japan 2021.

website：https://www.itake.co.jp/

This is developed by our company,
Cordless Thailand will be.
Body frame is

Constructed based on TT-E type.
The power supply is moving with two batteries.

1 is 24V.
By setting this on the main unit,

It is operating at 48V.
I will actually move it.

First of all, there are two switches.
First, switch the switch to supply power to the drive circuit.

Next is the start of the motor.
Motor startup is done with a switch.

It works like this.

When stopping, press the same switch again.

The rotation is stopped here.
Rotation startup can be done freely with a hand switch.

And finally,
Turn off the switch of the drive circuit.

This will stop completely.
It has such a configuration.

It is still in the middle of development,
We are planning to finish it to something that everyone uses.

Thank you very much.

Geofive Co., Ltd. is exhibited Three-dimensional ground radar exploration device at Mass-Trans Innovation Japan 2021.

website：http://www.geo5.co.jp/

This day is exhibiting here, 3D radar.
Content,
Underground radar,

Is there a cavity under the ground using electromagnetic waves,
Is there a buried pipe,
It is a machine used to look for such things.

Originally the road, it is a bridge,
It is what was used in such a place,

I want to check the thickness of the ballast even if it is a railway
or,

By examining the moisture content using analysis,
Where to be suffering from the mock,
Please take a look at the form that you want to investigate this place,

We introduce us.
Feature,

It is said that it can be seen from 3D 3 directions,
Because it is a feature of only this device,

If you are interested, thank you.

Diamond Electronics Application Co., Ltd. is exhibited Ultrasonic flaw detection device “Topaz (R) 64” at Mass-Trans Innovation Japan 2021.

website：https://www.dia-elec.com/

We will be a manufacturer that handles nondestructive inspection equipment.
This time, this ultrasound phased array flaw detector is

In the series of TOPZA,
It is a device that detects defects inside the axle.
In the application, the screen appears here

Speaking of this, add ultrasound inside the axle,

Now, I’m rotating by the scanner, but
By the scanner, by inserting the sound of ultrasound,
There is a slit scratch here, but

On the drawings here,
Slit scratches are reflected.
In this form,

It is a device that exploits the inside of the material in nondestructive.
As we exhibit here,

Thank you.

Izadake Corporation Co., Ltd. is exhibited CEMBRE “Battery-type rail drilling machine” at Mass-Trans Innovation Japan 2021.

website：https://www.itake.co.jp/

This product is Cembre’s drilling machine made Italian,
We will introduce battery type drilling machine.

Features,
Conventionally, the current type connected to the engine type and the generator was mainstream, but

This time it becomes a battery type.
As a feature, a perforated bar,

Here, 80 holes can be held per one.
The biggest feature is

It can be opened in 12 to 3 seconds of perforation time

Thank you.

Ichiguchi Co., Ltd. is exhibited Bali take-up bit at Mass-Trans Innovation Japan 2021.

website：http://www.ichiguchi.co.jp/

This time, newly launched,
We will introduce the bits of burrs that occur after the rail drilling.

Compared with traditional products,
It is characterized by the polishing cloth.
It is a traditional product, metal,

With Yasuri stick etc
Returned Bali may come out,
As a characteristic of the polishing cloth,

Returned burrs.
Usually sold, customers have the Impact Driver,

It is possible to easily attach to the electric drill driver.
The product itself is a hexagonal axis like this,

There is product body,
You can easily tighten and remove it.

And please attach to the impact driver,

Hole burr after processing,
It is easy to get a barrier in about 10 seconds.