[카테고리:] Highly-functional Material Week TOKYO 2021

Takikawa Engineering Co., Ltd. is exhibited Defect marking device “Ellastine Marker” at Highly-functional Material Week TOKYO 2021.

website：https://takikawa-eng.co.jp/

This marking device is patented by our company,
With a marking device that has never existed before

Normally, I sometimes ink or print, but
If it works due to a malfunction when it is attached, it will become defective,

Here, regardless of the line speed, we receive the signal of the swelling part and attach a rubber band to it for marking.

The big feature is to make sure to mark
Normally, this marking will not come off even if there is resistance in the direction of flow of the line,

After checking this,
If this is OK,
You can easily remove it when you go

Our marking device has a major feature that does not create defects that can be returned to the product.

As for rubber, we have a special rubber with a rubber maker.
It was made jointly, and now it’s red and white, black,

We are preparing green.

Hayashikazuji Co., Ltd. is exhibited Embossed pattern “High grain film” at Highly-functional Material Week TOKYO 2021.

website：http://www.hayashikazuji.co.jp/

I will explain about high grain film.
High grain film is embossed on the film, isn’t it?

It is a processed film, and it can be used for food separation.

For rubber mold release, for various purposes,

It will be an easy-to-use film.
The embossed pattern may be semi-circular

The shape of the diamond pattern,
Various shapes have different heights,

There are different pitches and various ones.
Although it is compatible, PE is the basis, but PP, special EV, elastomer

We also handle that area.
Since it is made to order by our company, please contact us first.

Mie Electronics Co., Ltd. is exhibited Touch panel LCD unit for industrial equipment at Highly-functional Material Week TOKYO 2021.

website：https://mie-elec.co.jp/

My name is Mie Electronics.
We are a company that mainly sells LCD modules.

In the past, we used to sell only the tip of LCD devices as LCD modules.

This time, we used various components as a unit and had a lot of LCD monitors.
We sell it in the form of a panel PC.

LCD module plus, touch panel, and then convert analog signals to digital signals for LCDs,

It’s an AD board, you can sell such things as a set,

Modules, touch panels, and AD boards can also be sold separately.
As for the usage, you can buy it for your research and development, and as a product for development,

You can use it as a panel for the operation panel or as a panel equipped with a PC.

It can also be used as an operation panel, so I think it can be used for various purposes.

Thank you.

Seiko Advance Co., Ltd. is exhibited IR ink for infrared cameras at Highly-functional Material Week TOKYO 2021.

website：http://seikoadvance.co.jp/

Nice to meet you. My name is Suzuki from Seiko Advance. This is our recommended product.
I will explain the ink for infrared cameras and IR ink.

There are four major features.
One is low transmission of wavelengths up to infrared light,

As you can see from this graph, it is as low as 780 nanometers.

Transparency can be suppressed, but it rises sharply from 780 nanometers,

After that, it can have a transmittance of 90%.
Next, there is a high degree of blackness.

Here, with conventional IR ink, high blackness could not be maintained, but
As you can see here, the blackness can be expressed compared to the past.

The third is that this is a pigment ink, so it has high light resistance.

This is a fade meter test, 400 hours

⊿E can be suppressed to 1% or less.
Finally, because of the low HAZE value, the haze value at 940 nm is 1% or less.

We are able to maintain a fairly low HAZE value.

It’s at the bottom of this panel, but the HAZE value of the IR of the conventional product is

It’s pretty hazy, but TCIE and ATS here

It is a product that allows you to take a fairly clear image with a camera.
This is a product that we have developed in anticipation of future autonomous driving of automobiles.

We will continue to publicize and use it for our customers.
I would like to proceed.

Honshu Chemical Industry Co., Ltd. is exhibited Bio-derived raw material ester-type acid dianhydride “ISS-TME” at Highly-functional Material Week TOKYO 2021.

website：https://www.honshuchemical.co.jp/

This product uses our technology, one is isosorbide, which is a raw material derived from biotechnology.

Using this,
We are developing a product called ISSTME this time.
We are developing it in collaboration with Tokyo Institute of Technology, and the expected characteristics are:

It is colorless and transparent, has a low refractive index, and has a low double folding rate.

Regarding other physical characteristics, if the standard physical characteristics of polyimide are obtained,

While adding bio-derived isosorbide to polyimide,
We will develop a next-generation polyimide that is colorless and transparent, has a low refractive index, and has a low double folding rate.

Taking advantage of these colorless and transparent characteristics and low refractive index, I went to bio-derived.

It will be development, but by taking advantage of such characteristics,

We would like our customers to develop their applications.

Sugai Chemical Industry Co., Ltd. is exhibited Ultra-high refractive index compound “dinaftthiophene derivative” at Highly-functional Material Week TOKYO 2021.

website：https://www.sugai-chem.co.jp/

This is the compound that we are currently focusing on.
It is called a dinaphthophene derivative and is the world’s top level ultra-high refractive index compound.

Even if it is called an ultra-high refractive index compound, it is better than an inorganic material.

As an organic material, it maintains a very high refractive index of 1.8 as an organic compound.

By the organic synthesis reaction, which is the basic skeleton of DNT, which is our specialty.

By inducing, we are responding to the needs of our customers.

Derivatives are the main product here. There are 6 types, one is 6VDNT, 6MDNTA

There are 6MDNTMA and 6ENDT.

Recently, a composite particle of 6MDNTMA and polyimide, which was jointly developed with Dosan Institute of Technology in Tokyo,

We are also doing research and development.

For semiconductor materials, engineering materials, etc.
We would like you to use it.

Ukawa Rubber Mfg. Co., Ltd. is exhibited Highly resilient rubber sponge “Super Set Foam” at Highly-functional Material Week TOKYO 2021.

website：https://www.ukawa-rubber.co.jp/

This product name is Super Set Form.
The main raw material is a rubber foam using EPDM.

The only major feature is that it is very easy to understand,

Normally, EPDM foam is very soft and has good followability, but it has one drawback.

The compressed liquid may not be good because it will be worn out over time.
What’s great about our Super Set Form is:

It is said that the place where the clip was taken earlier will be completely restored.

This is a big feature.
It is often used as packing in such a case, but

When you open a normal sponge,

There is a trail behind this door,
Originally, the one that had returned firmly has a mark, and this is in a state where the water has not stopped.

I’d like you to see this, but when you open it, I think you can see it returning instantly.

In this way, I have been using the same furniture since 2013,

Even after standing for about 9 years, the only difference is that this is water stoppage or confidential.

It will be a foam with such characteristics that makes a big difference.

Kurabo Industries is exhibited Kura Power Seat (R) at Highly-functional Material Week TOKYO 2021.

website：https://www.kurabo.co.jp/

We are exhibiting a product called Kura Power Sheet this time.
The feature is that it is very thin and soft as you can touch it.

As Kurabo Industries, we made various oriented sheets from this sheet.

Match it to the physical characteristics of your order
We sell products with various orientations, the number of layers, and the ones that are laminated to the molding maker.

In the past, press molding was the main focus at this exhibition.

This time, not only press molding but also the existing ones that customers have

Molding equipment, called pneumatic molding, internal pressure molding, oven molding,

Using the existing equipment that the customer has now without investing,

This time, we are trying to apply it to various molding methods in a form that can be molded.

We are doing PR.
We have applied powder resin to the Kura Power Sheet.

Most of the products on the market today are thermosetting.

There are many auxiliary materials that use resin, which harden the heat and harden when heated.

After all, due to the recent SDGs, recyclability will be asked in the future, so
With such a thermoplastic resin, it can be easily recycled, so

We use thermoplastic resin powder while being aware of such an environment.

Otsuka Electronics Co., Ltd. is exhibited Line scan film thickness meter at Highly-functional Material Week TOKYO 2021.

website：https://www.otsukael.jp/

I will explain the line scan film thickness meter.
Otsuka Electronics has been asked to measure a large number of film thicknesses, but

Until now, many customers were dissatisfied with the fact that it was 1 point.

After all, I was able to measure a film thickness meter that can measure the measurement points on the entire surface.
Not only the thickness, but also other film abnormalities are here.

It is in the form of being able to judge.

Basically, there are film thickness range, time, and system, so

I hope that you can just ask for the details. that’s all.

SABIC is exhibited Polycarbonate “LEXAN” film portfolio at Highly-functional Material Week TOKYO 2021.

website：https://www.sabic.com/

At SABIC and Petral Chemical Japan,
We are exhibiting polycarbonate film sheet products.
SABIC is the world’s first company to develop polycarbonate resin.

We sell high value-added films and sheet products that apply them.

Flame-retardant grade or coated with digital UV printing,

Various surface treatments and then foamable sheet products,

We produce a large assortment of products, including those with structural strength.

We hope you will come to our booth and pick it up for a look. Thank you.

Cold Jet (R) is exhibited Micro Clean 2 at Highly-functional Material Week TOKYO 2021.

website：https://coldjet.jp/

COLDJET’s dry ice blasting machine.
Put dry ice inside

With compressed air,
It is a machine that cleans by injecting from a nozzle.

I will hit it once.

Dry ice is sprayed in this way.

Dry ice washing machines are mainly targeted for washing, taking advantage of the characteristics of dry ice.

It’s a place where you shouldn’t use water, and you don’t want to leave residue.
It has been highly evaluated for cleaning targets.

Especially for washing molds,
Productivity efficiency because the mold can be washed while it is on the design machine.

By keeping the mold clean at all times
It is a useful product that keeps the quality of the product in a high position.